TVP5151IZQCR

TVP5151IZQCR Features

• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I,M, N, Nc), and SECAM (B, D, G, K, K1, L) Video • Supports ITU-R BT.601 Standard Sampling • High-Speed 9-Bit Analog-to-Digital Converter(ADC) • Two Composite Inputs or One S-Video Input • Fully Differential CMOS Analog PreprocessingChannels With Clamping and Automatic GainControl (AGC) for Best Signal-to-Noise (S/N)Performance • Ultralow Power Consumption • 48-Terminal PBGA Package (ZQC) or32-Terminal TQFP Package (PBS) • Power-Down Mode: <1 mW • Brightness, Saturation, Hue, and SharpnessControl Through I2C • Complementary 4-Line (3-H Delay) AdaptiveComb Filters for Both Cross-Luminance andCross-Chrominance Noise Reduction • Patented Architecture for Locking to Weak,Noisy, or Unstable Signals • Single 27.000-MHz Crystal for All Standards •Internal Phase-Locked Loop (PLL) forLine-Locked Clock and Sampling • Subcarrier Genlock Output for SynchronizingColor Subcarrier of External Encoder • Variable Digital I/O Supply Voltage Range from1.8 V to 3.3 V

TVP5151IZQCR 1.2 Description

• Standard Programmable Video Output Formats– ITU-R BT.656, 8-Bit 4:2:2 With EmbeddedSyncs– 8-Bit 4:2:2 With Discrete Syncs • Macrovision™ Copy Protection Detection • Advanced Programmable Video OutputFormats– 2× Oversampled Raw Vertical BlankingInterval (VBI) Data During Active Video– Sliced VBI Data During Horizontal Blankingor Active Video • VBI Modes Supported– Teletext (NABTS, WST)– Closed-Caption Decode With FIFO andExtended Data Services (XDS)– Wide Screen Signaling, Video ProgramSystem, CGMS-A, Vertical Interval TimeCode– Gemstar 1x/2x Electronic Program GuideCompatible Mode– Custom Configuration Mode That AllowsUser to Program Slice Engine for Unique VBIData Signals • Power-On Reset •Industrial Temperature Range(TVP5151I): –40°C to 85°CThe TVP5151 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving48-terminal PBGA package or a 32-terminal TQFP package, the TVP5151 decoder converts NTSC, PAL,and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimizedarchitecture of the TVP5151 decoder allows for ultralow power consumption. The decoder consumes138-mW power under typical operating conditions and consumes less than 1 mW in power-down mode,considerably increasing battery life in portable applications. The decoder uses just one crystal for allsupported standards. The TVP5151 decoder can be programmed using an I2C serial interface.The TVP5151 decoder converts baseband analog video into digital YCbCr 4:2:2 component video.Composite and S-video inputs are supported. The TVP5151 decoder includes one 9-bit analog-to-digitalconverter (ADC) with 2× sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 27.000-MHzcrystal or oscillator input) and is line locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656with embedded synchronization.

TVP5151IZQCR 1.3 Applications

The following is a partial list of suggested applications: • Digital televisions • PDAs • Notebook PCs • Cell phones • Video recorder/players • • Handheld games • Surveillance • Portable navigation • Portable video projectorsInternet appliances/web pads