AT32UC3A0256-ALUR

AT32UC3A0256-ALUR Features

• High Performance, Low Power 32-Bit Atmel® AVR® Microcontroller– Compact Single-cycle RISC Instruction Set Including DSP Instruction Set– Read-Modify-Write Instructions and Atomic Bit Manipulation– Performing 1.49 DMIPS / MHzUp to 91 DMIPS Running at 66 MHz from Flash (1 Wait-State)Up to 49 DMIPS Running at 33MHz from Flash (0 Wait-State)– Memory Protection Unit • Multi-hierarchy Bus System– High-Performance Data Transfers on Separate Buses for Increased Performance– 15 Peripheral DMA Channels Improves Speed for Peripheral Communication • Internal High-Speed Flash– 512K Bytes, 256K Bytes, 128K Bytes Versions– Single Cycle Access up to 33 MHz– Prefetch Buffer Optimizing Instruction Execution at Maximum Speed– 4ms Page Programming Time and 8ms Full-Chip Erase Time– 100,000 Write Cycles, 15-year Data Retention Capability– Flash Security Locks and User Defined Configuration Area • Internal High-Speed SRAM, Single-Cycle Access at Full Speed– 64K Bytes (512KB and 256KB Flash), 32K Bytes (128KB Flash) • External Memory Interface on AT32UC3A0 Derivatives– SDRAM / SRAM Compatible Memory Bus (16-bit Data and 24-bit Address Buses) • Interrupt Controller– Autovectored Low Latency Interrupt Service with Programmable Priority • System Functions– Power and Clock Manager Including Internal RC Clock and One 32KHz Oscillator– Two Multipurpose Oscillators and Two Phase-Lock-Loop (PLL) allowingIndependant CPU Frequency from USB Frequency– Watchdog Timer, Real-Time Clock Timer • Universal Serial Bus (USB)– Device 2.0 Full Speed and On-The-Go (OTG) Low Speed and Full Speed– Flexible End-Point Configuration and Management with Dedicated DMA Channels– On-chip Transceivers Including Pull-Ups • Ethernet MAC 10/100 Mbps interface– 802.3 Ethernet Media Access Controller– Supports Media Independent Interface (MII) and Reduced MII (RMII) • One Three-Channel 16-bit Timer/Counter (TC)– Three External Clock Inputs, PWM, Capture and Various Counting Capabilities • One 7-Channel 16-bit Pulse Width Modulation Controller (PWM) • Four Universal Synchronous/Asynchronous Receiver/Transmitters (USART)– Independant Baudrate Generator, Support for SPI, IrDA and ISO7816 interfaces– Support for Hardware Handshaking, RS485 Interfaces and Modem Line • Two Master/Slave Serial Peripheral Interfaces (SPI) with Chip Select Signals • One Synchronous Serial Protocol Controller– Supports I2S and Generic Frame-Based Protocols • One Master/Slave Two-Wire Interface (TWI), 400kbit/s I2C-compatible • One 8-channel 10-bit Analog-To-Digital Converter • 16-bit Stereo Audio Bitstream– Sample Rate Up to 50 KHz

AT32UC3A0256-ALUR Description

The AT32UC3A is a complete System-On-Chip microcontroller based on the AVR32 UC RISCprocessor running at frequencies up to 66 MHz. AVR32 UC is a high-performance 32-bit RISCmicroprocessor core, designed for cost-sensitive embedded applications, with particular empha-sis on low power consumption, high code density and high performance.The processor implements a Memory Protection Unit (MPU) and a fast and flexible interrupt con-troller for supporting modern operating systems and real-time operating systems. Highercomputation capabilities are achievable using a rich set of DSP instructions.The AT32UC3A incorporates on-chip Flash and SRAM memories for secure and fast access.For applications requiring additional memory, an external memory interface is provided onAT32UC3A0 derivatives.The Peripheral Direct Memory Access controller (PDCA) enables data transfers between periph-erals and memories without processor involvement. PDCA drastically reduces processingoverhead when transferring continuous and large data streams between modules within theMCU.The PowerManager improves design flexibility and security: the on-chip Brown-Out Detectormonitors the power supply, the CPU runs from the on-chip RC oscillator or from one of externaloscillator sources, a Real-Time Clock and its associated timer keeps track of the time.The Timer/Counter includes three identical 16-bit timer/counter channels. Each channel can beindependently programmed to perform frequency measurement, event counting, interval mea-surement, pulse generation, delay timing and pulse width modulation.The PWM modules provides seven independent channels with many configuration optionsincluding polarity, edge alignment and waveform non overlap control. One PWM channel cantrigger ADC conversions for more accurate close loop control implementations.The AT32UC3A also features many communication interfaces for communication intensiveapplications. In addition to standard serial interfaces like UART, SPI or TWI, other interfaces likeflexible Synchronous Serial Controller, USB and Ethernet MAC are available.The Synchronous Serial Controller provides easy access to serial communication protocols andaudio standards like I2S.The Full-Speed USB 2.0 Device interface supports several USB Classes at the same timethanks to the rich End-Point configuration. The On-The-GO (OTG) Host interface allows devicelike a USB Flash disk or a USB printer to be directly connected to the processor.The media-independent interface (MII) and reduced MII (RMII) 10/100 Ethernet MAC moduleprovides on-chip solutions for network-connected devices.AT32UC3A integrates a class 2+ Nexus 2.0 On-Chip Debug (OCD) System, with non-intrusivereal-time trace, full-speed read/write memory access in addition to basic runtime control.32058KAVR32-01/12