Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
Obsolete
Analog Devices Inc./Maxim Integrated
Maxim Integrated has amalgamated with Analog Devices, imparting an augmented repertoire of superlative mixed-signal and power governance innovations, fostering clientele triumph across diverse sectors. This amalgamation begets a spectrum of resolutions for surmounting the utmost intricate quandaries, spanning from direct current to the expanse of 100 gigahertz, encompassing miniscule nanowatt realms to robust kilowatt domains, spanning the sensor continuum to the ethereal expanse of cloud. Delve deeper into Analog Devices' enriched assemblage on their product dossier.
Bostock Quality Assurance
DS232AE+ FEATURES
(cid:131) Compatible with LT1181A and MAX232A(cid:131) High data rate - 250 kbits/sec under load(cid:131) 16-pin DIP or SOIC package(cid:131) 20-pin TSSOP package for height restrictedapplications(cid:131) Operate from single +5V power(cid:131) Meets all EIA-232E and V.28 specifications(cid:131) Uses small capacitors: 0.1 μF(cid:131) Optional industrial temperature rangeavailable (-40°C to +85°C)16-pin DIP
DS232AE+ PIN DESCRIPTION
VCCGNDV+V-T1IN, T2INT1OUT, T2OUTR1IN, R2INR1OUT, R2OUTC1+, C1-C2+, C2-- +5-Volt Supply- Ground- Positive Supply Output- Negative Supply Output- RS-232 Driver Inputs- RS-232 Driver Outputs- Receiver Inputs- Receiver Outputs- Capacitor 1 Connections- Capacitor 2 Connections
DS232AE+ applications
DS232AE+ PIN DESCRIPTIONS
VCC, GND: DC power is provided to the device on these pins. VCC is the +5-volt input.V+: Positive supply output (RS-232). V+ requires an external storage charge capacitor of at least 0.1 μF.A larger capacitor (up to 10 μF) can be used to reduce supply ripple.V-: Negative supply output (RS-232). V- requires an external storage capacitor of at least 0.1 μF. Alarger capacitor (up to 10 μF) can be used to reduce supply ripple.T1IN, T2 IN: Standard TTL/CMOS inputs for the RS-232 drivers. The inputs of unused drivers can be leftunconnected since each input has a 400 kΩ pullup resistor.T1OUT, T2 OUT: Driver outputs at RS-232 levels. Driver output swing meets RS-232 levels for loads up to3 kΩ. These driver outputs provide current necessary to meet RS-232 levels for loads up to 2500 pF.2 of 10
Product Attributes
TYPE | DESCRIPTION | Select all |
---|---|---|
Package | Tube | |
Supplier Device Package | 20-TSSOP | |
Product Status | Obsolete | |
Type | Transceiver | |
Protocol | RS232 | |
Receiver Hysteresis | 500 mV | |
Number of Drivers/Receivers | 2/2 | |
Duplex | Full | |
Data Rate | 350kbps | |
Supply Voltage | 4.5V ~ 5.5V | |
Operating Temperature | -40°C ~ 85°C | |
Mounting Type | Surface Mount | |
Package / Case | 20-TSSOP (0.173", 4.40mm Width) |
Obsolete
Analog Devices Inc./Maxim Integrated
Maxim Integrated has amalgamated with Analog Devices, imparting an augmented repertoire of superlative mixed-signal and power governance innovations, fostering clientele triumph across diverse sectors. This amalgamation begets a spectrum of resolutions for surmounting the utmost intricate quandaries, spanning from direct current to the expanse of 100 gigahertz, encompassing miniscule nanowatt realms to robust kilowatt domains, spanning the sensor continuum to the ethereal expanse of cloud. Delve deeper into Analog Devices' enriched assemblage on their product dossier.